Circuit Project Electronic

Archive for the 'switching power supply' Category

DC Converter 12V to 1.5V at 4A by 78S40
Saturday, August 8th, 2009





The 78S40 is a very old, but still useful power conversion chip. It contains a 1.25V reference, comparator, gating, output transistor, flyback diode and an uncommitted operational amplifier, which is not used here, and draws very little power. As the internal transistor and diode are good only for 1A maximum, I had to use external [...]

Tags: ,

INVERTER 4W by TL494
Tuesday, March 17th, 2009





The inverter is based on the TL494 integrated circuit. This is a switching regulator that will operate with an input voltage of between 7 and 40 volts DC. This input voltage is supplied to the IC through a reed relay. The reed in normally open. When filament current from a valve radio passes through a [...]

Tags: , ,

Switching Regulator by L4972A
Monday, March 16th, 2009





The LA9472A is a 2A monolithic step down switching regulator operating in continuous mode and realized in a new BCD technology allowing the integration of isolated, vertical DMOS power transistors with mixed CMOS/bipolar transistors. The device can deliver 2A at an output voltage adjustable from 5.1V to 40V … Link

Tags: , ,