Circuit Project Electronic

500W Mosfet Power Inverter from 12V to 110V-220V
Sunday, August 9th, 2009

This circuit will provide a very stable “Square Wave” Output Voltage. Frequency of operation is determined by a pot and is normally set to 60 Hz. Various “off the shelf” transformers can be used. Or Custom wind your own FOR BEST RESULTS. Additional MosFets can be paralleled for higher power. It is recommended to Have [...]

Tags: , ,



6 Zone Alarm with 7 Segment Display with IC 4001
Sunday, November 9th, 2008

This alarm system has 6 independent zones, 1 timed entry/exit zone, a 7 segment LED display and a test or walkthrough facility. Suitable for a small office or home environment, it can also be adapted to use a combination lock or keypad to set and reset the alarm.
All zones Z1 to Z6 use normally closed [...]

Tags: , ,



HiJack Alarm No.3 using IC 4001
Sunday, November 9th, 2008

Like the first two Hijack Alarms - this circuit was designed primarily for the situation where a hijacker forces the driver from the vehicle. If a door is opened while the ignition is switched on - the circuit will trip. After a few minutes delay - when the thief is at a safe distance - [...]

Tags: , ,