Here is the schematic diagram of my regulator. You may want to print it out, and then go on reading. This regulator is designed for 12V systems employing panels of up to 7A total current, and loads of not over 20A. It can be easily modified for greater currents. [....]
Link : http://ludens.cl/Electron/solarreg/Solarr%7E1.htm
Senses high current-flow into power cables
No wire-cutting, three versions available
The basic circuit is shown top left in the drawing and must be used in all three versions. IC1 acts as a differential amplifier having a gain of 220. The small AC voltage picked-up by L1 is therefore amplified to a value capable of driving the [...]
This circuit will provide a very stable “Square Wave” Output Voltage. Frequency of operation is determined by a pot and is normally set to 60 Hz. Various “off the shelf” transformers can be used. Or Custom wind your own FOR BEST RESULTS. Additional MosFets can be paralleled for higher power. It is recommended to Have [...]
Obsession Theme by Lorelei. Coded by Cheap web hosting and Hostmonster.
Featuring Liza Kliko's artwork in the header.
