Circuit Project Electronic

Fast Electronic Fuse
Friday, October 10th, 2008





When the current through the load exceeds a level determined by the position of the wiper on the 1k wire-wound pot, this circuit cuts off the load immediately. If S1 is open, the range is approximately 300-650 mA, and 0.8-2A when it is closed.
The key variable in the operation of the fuse is the voltage [...]

Tags: ,

A low cost step-up converter by IC 555
Thursday, September 4th, 2008





This is a power source that creates a DC voltage higher than the voltage feeding the it. It might be used to power your laptop (+18V) from a car battery (12V ~ 13.8V). It is built using very ordinary parts that should be readily available. [.....]
Read more : A low cost step-up converter by IC [...]

Tags: , ,

DC Power Supply 1.25V to 25V
Monday, August 4th, 2008





This power supply is based on the LM317 Variable Regulator. The input of the regulator needs to be around 28 Volts DC and it will output a DC voltage from 1.25vdc to 25 vdc. To adjust the output voltage simply turn the 5k ohm pot. The regulator will supply 1.5 amps of current.
Source : DC [...]

Tags: , ,